Jaguar

This is a very nice used grease gun, correct for Jaguar XK150, XKE, E-type, Mark 2, Mark IX and X, S-type, Daimler 2 1/2 and other Jaguars of the 1960s and late 1950s. It is in very good original condition.

All Jaguars of the 1950s, 1960s, and 1970 with wire wheels came with a Thor 2-lb. copper and rawhide hammer for the wire wheel knockoffs. This is the correct one for an XK120, XK140, XK150, Mark I, Mark II, E-type, XKE, Mark VIII, Mark IX, Mark X, 240, 340, S-type 2.4 and 3.8, and most Daimlers.It's in new, perfect condition, 100 percent concours correct and made by the original manufacturer in England, exactly as original.We also have copper 1-lb hammers and plywood and steel knock off...

High quality reproduction of the original vinyl tool roll for your XK140, 150 or E-type. This is beautifully made, with the correct leather strap and buckle, and all the pockets properly sized, with correct off-white lining. This is from a supplier that is new to us, but the product is excellent. Our previous supplier no longer makes tool rolls for Jaguars. Jaguar PN C5578.

Jaguars made in the 1950s, 1960s and 1970s(XK120, XK140, XK150, Mark 2, 340, E-Type, XKE) came with high quality tool kits. There were several types of 4-inch adjustable spanners fitted to Jaguar kits from about 1955 through the 1970s, all marked "JAGUAR." These are very rare and expensive. This is a nice new 4-inch adjustable spanner, not correct for any Jaguar factory kit, but it fits perfectly and would make a fine substitute for somebody not concerned with building a concours-quality kit....

These are really well made reproductions of the correct 1950s Garringtons spanners, as used in Jaguar XK120, XK140, Mark VII, VIII and possibly other Jaguars. They are made to the original specifications, nicely done and show quality. They will fit the toolbox of a Mark I or 2, Mark IX or X, or S-type, although the correct spanner for those cars is a little different. We do carry a later style toolkit spanner for late model E-Types on this website.

Jaguar XJ cars came equipped with a comprehensive too kit from the factory. This is a particularly complete and nice example. The tools and spare bulbs and fuses appear to be original and correct. We believe this kit came from a so-called "XJ40" Jaguar, which might have been either an XJ6 or an XJ12. It would be a cool addition to any old Jaguar, though. It contains both metric and fractional wrench sizes.

For XK120 fixed and drop head coupes. 20 gauge steel, rolled and welded, holes punched. This part is not always in stock; please check for availability.Factory Part No. BD6256

For XK120 roadsters only. 20 gauge steel, rolled and welded, holes punched, hammered flange as original. Original factory number: BD4078. This part is not always in stock; please check for availability.

This is an excellent reproduction Trico windscreen washer top, correct for Jaguar XK120, 140, Mark VII, and many other British quality cars of the mid-to-late 1950s. This is a very nicely made product, manufactured in very small quantities in England. It is approximately 3 1/2 inches or 90 mm in diameter.You will have to install your original vacuum reservoir or purchase one separately; please contact us if you need one.We also sell new large Trico lids and complete Trico washer bottle...

This is a perfect, new reproduction Trico windscreen washer bottle and bracket in its original box. It is the correct part for Jaguar XK120 and XK140 (EXCEPT XK140 FHC; available by special order). It is a beautifully made part, far nicer than most of the reproduction British parts made today. It comes complete with a new, correct bracket and correct Trico decals. The bottle is correctly marked "TRICO" and the whole unit is show quality, concours-correct.We have new lids and a variety of...

Here is an excellent reproduction of the Trico vacuum-operated windscreen washer bottle and bracket assembly, as used on Jaguar XK150 and Mark IX, MG Magnette, Rovers, and other quality British cars of the 1950s. This is a quality reproduction, correct in every detail and show quality.We have a small assortment of original Trico washer bottles, and occasionally a new old stock (NOS) unit; please inquire.We also stock new Trico lids for this unit as well as Trico washer bottle assemblies for...

18/20 gauge steel formed and welded. Pair left and right.