Dashboards & Instrument Panels

60/1000 Aluminum Dash Panel formed and drilled to fit both Early and Late XK120 Roadsters. Made for left-hand drive models only. (Right-hand drive model part can be special ordered).  Original Jaguar factory number BD4606.

60/1000 Aluminum Dash Panel formed and drilled to Made for left-hand drive models only. (Right-hand drive model part can be special ordered). Original factory number BD8891.

BACK IN STOCK!Early XK120 OTS/Roadster models only. 5/8 Inch/12-ply Exterior Birch Plywood. Milled and drilled. Side angles glued. (To be covered with leather). Original factory part number C.2743. Single item only-photo shows front and back sides.

This is a new center instrument panel for XK140 Drophead and Fixed Head models only, made of 5/8 Inch/12-ply exterior birch plywood. Handmade in the UK. Milled and drilled. Side angles glued. This part is not veneered but veneering is available-please inquire.We also have center instrument panels for XK140 OTS and XK120; see Related Products below. Panels for XK150 are available by special order.

This is a new XK140 OTS/Roadster center instrument panel made of 5/8 Inch/12-ply exterior birch plywood. Milled and drilled. Handmade in the UK.To be covered with leather, not included. Original factory part number BD9228. Center instrument panels for XK140 DHC and FHC and XK120 are also available; see Related Products below.

This glovebox lock is an original in excellent condition and the key is new old stock (NOS). It is complete with original Wilmot-Breeden Union key, in perfect shape and working smoothly.It is correct for all Jaguar saloons of the 1950's and 1960's (Mark 1, 2, VII, VIII, IX, 3.8S, 420, Mark X, possibly Mark V), all XK120, XK140 and XK150 cars.

Original chrome-plated brass handle with escutcheon, spring, spacer and pin, to fit most Jaguars of the 1950s and 1960s. This is a good secondhand part, with good chrome and a decent shine. It is not warranted to be free of minor scuffs, pits or other damage but it will be decent and presentable for a driver quality car. The actual handle you receive may not the item shown in the pictures, but it will be equivalent quality and condition.

This is a pair of original chrome-plated brass handles with escutcheon, spring, spacer and pin, to fit most Jaguars of the 1950s. This is a good secondhand part, with good chrome and a decent shine. It is not warranted to be free of minor scuffs, pits or other damage but it will be decent and presentable for a driver quality car. The actual handles you receive may not be the item shown in the pictures, but they will be equivalent quality and condition. This is ONE PAIR of handles, correct for...

Original chrome-plated brass handle with escutcheon, spring, spacer and pin, to fit most Jaguars of the 1960s. This is a good secondhand part, with good chrome and a decent shine. It is not warranted to be free of minor scuffs, pits or other damage but it will be decent and presentable for a driver quality car. The actual handle you receive may not the item shown in the pictures, but it will be equivalent quality and condition.

This brand new oil pressure and water temperature gauge, made by SMITHS in England, is the correct one for MGBs with the metal dash, MG Midgets and Austin-Healey Sprites, some Austin-Healey 3000s, Morgans, and Land Rovers. It looks identical to the MGA gauge, except that it is marked "SMITHS" instead of "JAEGER," and will work fine in just about any car, British or otherwise. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British...

This is a very decent original pair of RHD dashboard casings from a Jaguar 420 (this is the small-bodied 4.2 saloon, not the large 420G). They are in very good shape with excellent veneer, although the original finish is in need of replacement. They have never been refinished. We have the instruments as well from this car, but not the vinyl surround. We also have an excellent bonnet and bootlid, a couple of doors, alternator, and many other small parts from a 420. Email us for details.

This is a new wooden instrument panel for late XK120 OTS/Roadster models only, HANDMADE IN THE UK. 5/8 Inch/12-ply exterior birch plywood. Milled and drilled. Side angles glued. To be covered with leather.