Products 1-6 of 6
Show
Knock-off Spinners, 8 or 12 TPI, Set of 4, New
Retail: $268.00
Price: $241.00
Item #: 200-280/290 or 674-670/680 -

This is a brand new and perfect set of four knockoff spinners that were original equipment on Austin-Healeys, Triumphs and MGs (although MG T series and MGA had MG crest knock-offs, which we also sell). They are nicely made to the original specifications and the chrome plating is just beautiful. They are available with 8 or 12 threads per inch (tpi).12 tpi is correct for Austin-Healey Sprite Mk II and Austin-Healey 3000 up to BJ8 (c)26705, MG T series cars, MGAs, MGBs up to chassis no. 30850...

Knock-off Spinners, MG Crest, 8 or 12 TPI, Set of 4, New Knock offs
Retail: $268.00
Price: $241.00
Item #: 200-210/220 or 200-215/225 -

This is a brand new and perfect set of four knockoff spinners with the MG crest for MGs. They are nicely made to the original specifications and the chrome plating is just beautiful. They are available with 8 or 12 threads per inch (tpi).12 tpi is correct for TC, TD, TF, Magnette, MGA and early MGB roadster up to chassis no. 30850. They were original equipment on T-series and MGA cars.8 tpi is correct for later MGB roadster, MGC and MG Midget.

Long-Handled Knockoff Wrench, New
Retail: $75.00
Price: $68.00
Item #: 386-125, 130 -

The days when folks bashed their knockoff spinners with a rusty ball pein hammer are long past. Now we offer two ways to save your shiny knockoffs from hammer damage. One is to use our plywood knockoff tools; see Related Products below. The other is to use this handy tool, which slips over the ears of your car knockoff spinner and allows you to use the force of leverage to tighten or loosen the spinner. We have used one of these on our own MGA for many years and have never seen it cause damage...

Plywood 42 mm Knock-off Wrench, Austin-Healey, MG, Triumph, New
Price: $33.00
Item #: PW KO wrench MG -

This laminated wooden wrench fits over standard British 42mm knock off spinners for tightening and loosening and protects them from hammer marks.We also stock an alternative design: long steel knock off wrenches. For these or 52 mm Jaguar plywood knock off wrenches, knock off hammers and knock off spinners, see Related Products below.

Plywood 52 mm Knock-off Wrench, Jaguar, New
Price: $36.00
Item #: 386-175 -

This laminated wooden wrench fits over 52mm Jaguar knock off spinners for tightening and loosening and protects them from hammer marks.We also stock an alternative design: long steel knock off wrenches. For these or 42 mm plywood knock off wrenches to fit MG, Austin-Healey, Triumph, etc.; knock off hammers and knock off spinners, see Related Products below.

Thor 2-lb Knockoff Hammer, New
Retail: $57.00
Price: $55.00
Item #: C992 -

All Jaguars of the 1950s, 1960s, and 1970 with wire wheels came with a Thor 2-lb. copper and rawhide hammer for the wire wheel knockoffs. This is the correct one for an XK120, XK140, XK150, Mark I, Mark II, E-type, XKE, Mark VIII, Mark IX, Mark X, 240, 340, S-type 2.4 and 3.8, and most Daimlers.It's in new, perfect condition, 100 percent concours correct and made by the original manufacturer in England, exactly as original.We also have copper 1-lb hammers and plywood and steel knock off...