Bumpers & Grilles

The sports car accessory company AMCO made these grille aperture guards for E-type Jaguars in the 1960s and 1970s. This one is 28" wide and comes with original bolts.  We BELIEVE it is correct for a Series 1. This one is in excellent condition, but does have a few small scratches on the underside where it has successfully protected a bonnet from contact with the pavement.

Solid and straight rear bumper from 1961-69 MG Midget or Austin-Healey Sprite. Fine for a driver or for rechroming, but the chrome is dull. Brackets and overriders included, as the picture shows.The price includes a $25 crating fee, which will be refunded if we don't have to pack the bumper to be shipped.

New reproduction bonnet badge for all XK120 cars. This is a quality item, nicely made cloisonne on brass. Jaguar part number BD3286.

This is a new reproduction grille surround for an Austin-Healey 3000 Mk II and Mk III, correct for all cars with vertical slats (all cars after Car # 13751). Vertical and horizontal grille slat assemblies are also available; see Related Products below or contact us.The cowl and some ancillary hardware is available by special order; please inquire.

This is a new chrome-plated brass MGA Mark II grille, exactly as original. The workmanship is excellent and the quality of the chrome is superb. It comes with new mounting hardware and piping.PLEASE NOTE: The grille in the pictures shows a white plastic coating on the vanes. The grilles we sell do NOT have this coating any more. We will update the picture shortly.It comes with an ironclad guarantee that it will fit as well as an original grille, although be forewarned that if your car has been...

This is a new chrome-plated brass MGA grille, exactly as original, and 10% OFF LIST. The workmanship is excellent and the quality of the chrome is superb. This is a higher quality reproduction than the one available from Moss Motors, and a better fit. It comes with new mounting hardware and piping. It comes with an ironclad guarantee that it will fit as well as an original grille, although be forewarned that if your car has been damaged in the front end (let's face it: what 50-year-old MG has...

A pair of welded steel driving/spot/foglamp brackets that bolt to the XK140 or XK150 bumper brackets under the plinth.Complete installation kits for XK140 and XK150 and brackets for XK120 are also available in separate listings; see Related Products below.Jaguar P/N: BD.9242/3

This is hardware kit to mount 576 foglamps on a XK140 or XK150. This kit comes with left and right brackets, special extended nuts, chrome spacers and grommets to do the installation properly. Many XK 140 and 150 cars did not come equipped with driving/spot or foglamps. We sell the correct Lucas SFT576 or SLR576 lamps for these cars, but if yours did not originally come with these lamps, you will need brackets to mount them. We do sell the brackets alone; see Related Products below.The lamp...

Panel between bumper and body. 20 gauge steel formed with 3 special welded brackets. (L-brackets attaching this to the bumper (X108) sold separately. Pair, left and right. Factory numbers BD10248 & BD10249.

Panel between bumper and body. 20 gauge steel formed with 2 special welded brackets. (L-brackets attaching this to the bumper (X108) sold separately. Pair, left and right. Factory numbers BD13411 & BD13412

This is a used bumper from a 1967 420 Jaguar. It fist all 420s from 1967 and 1968, and it's also correct for a 1967-69 Daimler Sovereign (pre-XJ style). It is NOT correct for the 420G large saloon.It is in fairly straight, sound condition, although the chrome is only fair. No major bends or rust-through.We have a complete 420 car which we are parting out, as well as parts from another one. ALL parts are available, so please send us an email for more information or call us at 413-259-1722....

XK120 (USA models only) front license plate or number plate bracket. 16 gauge steel; pressed, formed and punched with riveted supports as original.Factory part number: C.4182