Products 13-24 of 29
Item #: RM00597 -
Panel between bumper and body. 20 gauge steel formed with 3 special welded brackets. (L-brackets attaching this to the bumper (X108) sold separately. Pair, left and right. Factory numbers BD10248 & BD10249.
Item #: RM00596 -
Panel between bumper and body. 20 gauge steel formed with 2 special welded brackets. (L-brackets attaching this to the bumper (X108) sold separately. Pair, left and right. Factory numbers BD13411 & BD13412
Item #: RM00608 -
These bumpers, correct for all Jaguar XK120 models, are made in the UK, mirror-plated and polished. One restorer tells us they are better than the originals. While we wouldn't go that far, we will vouch for their quality and will gladly accept returns if you are not satisfied.We do not stock these; this is a special order item.
Item #: RM00593 -
This is a used bumper from a 1967 420 Jaguar. It fist all 420s from 1967 and 1968, and it's also correct for a 1967-69 Daimler Sovereign (pre-XJ style). It is NOT correct for the 420G large saloon.It is in fairly straight, sound condition, although the chrome is only fair. No major bends or rust-through.We have a complete 420 car which we are parting out, as well as parts from another one. ALL parts are available, so please send us an email for more information or call us at 413-259-1722....
Item #: RM00605 -
Here is a good, straight front bumper for a Volvo 121, 122S or 123GT. It came from a former California car, never in a major accident or rusted. The chrome is pretty dull but the bumper is clean and would be a perfect candidate for rechroming, or usable as it is for a driver. We do not have the bumper guards.We do have a good supply of other 122 parts, rear bumpers, fenders, doors, good original seats, wheels, engines, you name it, we probably have it.
Item #: RM00907 -
16 gauge steel, pressed formed and punched with riveted supports as original (factory part: 'Number Plate Bracket #C4182)
Item #: RM00906 -
16 gauge steel pressed and formed as original (factory part 'Panel for Mounting Number Plate' BD9856). Also fits Jaguar MkVII & MkVIII, MkIX.
Item #: RM00905 -
16 gauge steel, pressed and formed as original (like factory part 'Panel for Mounting Number Plate' BD10982)
Item #: RM00457 -
This is a brand new high quality grille badge for a Jaguar Mark 2 or S-type 3.8. We have a couple in stock, and we are delighted with these badges, really nicely made.
Item #: RM00456 -
This is an excellent quality reproduction grille badge for a Jaguar XK150. It is beautifully made but note that the "rays" around the growling cat's head should be gold, not red. We have only ONE of these badges in stock.
Item #: RM00577 -
This is a new reproduction grille slat assembly for an Austin-Healey 3000 Mk II and Mk III, correct for all cars with vertical slats (all cars after Car # 13751). Horizontal grille slat assemblies and chrome grille surrounds are available; see related products below.Some ancillary hardware is available by special order; please inquire.
Item #: RM00451 -
This is a brand new, nicely-made reproduction bonnet mascot, correct for Jaguar saloons made between about 1950 and 1968, including Mark I, II (2), 3.4S, 3.8S, Mark VII, VIII, and IX. These large ( a little under 8 inches long) mascots were often fitted to XK120, XK140 and XK150 cars, usually by the dealer when they were new.This one is very nicely made, with good detailing and flawless chrome.