Products 193-204 of 273
Show
Red, four-place, Brexton picnic tea set. This is a basic set with two nice china cups and four saucers, all matching and marked "BREXTON." The thermos flasks match and are in good condition.
Item #: RM00434 -
We have a limited supply of these UK-published picture books, covering the history of Jaguar and the development of the Mark I and Mark 2, as well as the S-type and Daimler variants. The pictures are really stunning. Text is by Andrea Sparrow and pictures by award-winning photographer David Sparrow. The books are brand new and undamaged.
Item #: 386-175 -
This laminated wooden wrench fits over 52mm Jaguar knock off spinners for tightening and loosening and protects them from hammer marks.We also stock an alternative design: long steel knock off wrenches. For these or 42 mm plywood knock off wrenches to fit MG, Austin-Healey, Triumph, etc.; knock off hammers and knock off spinners, see Related Products below.
Item #: Mk I Restored Rear Lamps -
This is a rare pair of restored rear lamps or taillights for a Jaguar 2.4 or 3.4 Mark I saloon. The housings were rechromed, the lenses replaced with a new old stock pair and the lens gaskets and chrome lens screws were replaced. They are in superb condition, ready to use. The major suppliers offer nwe lamps like these for nearly $400 each, so these are a bargain compared to that! We have a lot of parts for Jaguar Mark I saloons, parts from cars we have dismantled as well as a mostly...
Item #: BD4256 -
18 gauge steel, formed, punched and welded. Captive nuts and light bracket. Factory part numbers for Number Plate Bracket: BD4256, BD4257 or BD5645
Item #: BD9932 -
18 gauge steel, formed, punched and welded. Welded brackets and captive nuts.Factory part: 'Number Plate Bracket' #BD9932Chrome finisher is available by special order for approx. $60 (check for latest price)
Item #: BD3384/85 -
Used on all models into 1953, although they will fit all XK120's. 18 gauge steel. Left and right pair. Jaguar factory part numbers BD3384 & BD3385.Each side is available separately; please contact us to order.
Item #: BD7750/51 -
Fits all XK120's and all XK140's. Originally used only on the latest XK120's and on XK140's. 18 gauge steel. Left and right pair. Each side is available separately for $65; please contact us to order. Factory part numbers: BD7750 & BD7751
Item #: BD13057/8 -
Fits all XK150's. 18 gauge steel with welded channels for weatherstrip. Left and right pair. Factory part numbers: BD13057 & BD13058Weatherstrip and oval washers are available separately. Each side is available separately; please contact us to order.
Item #: RM00627 -
This is an excellent original revolution counter from a 1958 Jaguar Mark IX saloon. It is in good working condition, clean with nice face, bezel and casing. The needle works when the input shaft is turned and it is free and smooth, so we are betting it could be used as it is.This instrument is designed for external illumination. However, it could be fitted with internal bulbs in the bosses at the rear with slight modification, and then it would be applicable for a Jaguar XK 120, 140 or early...
Item #: Electronic RF95 -
This is an upgraded, fully electronic brand new 12 volt Lucas RF95 regulator, as used on MG TC, Jaguar XK120, Alvis and other quality cars of the 1940s and 1950s. The original Lucas RF95 control box operated with bobbins and contact points, and could be troublesome when it got out of adjustment or the points got dirty or corroded. This regulator was made in England. They come without a proper Lucas-marked cover, due to trademark laws, but we fit the ones we sell with an...
Item #: BD14360 -
For XK150-S , 3 carburetor models only. Right side only. 18 gauge steel shelf with welded supports & brackets. 22 gauge face with turned edges hemmed. Upper panels. Hardware and special fasteners sold separately (#X71H). Original factory number was BD14360.