Products 169-180 of 253
Show
Item #: BD4173 -
For cars originally fitted with disc (non-wire) wheels only. 18 gauge steel with welded reinforcements and nuts. Factory # BD4173.
Item #: BD7760 -
For cars originally fitted with wire wheels only. 18 gauge steel with welded reinforcements and nuts. Factory # BD7760.
Item #: MGBtaillamppair -
This is a pair of original Lucas tail lamps. They are correct for MGB and Sprite/Midget from 1961 to 1969. This pair of tail lamps is in excellent used condition.
Item #: NOS Jag Mk 2 Oil Gauge -
Here is a very rare opportunity to buy an original, new old stock electric oil pressure gauge for a Jaguar E-type XKE, Mark 2 MK II 3.8S, 420, Mark X, 420G, Daimler 2 1/2 and 250, in fact, any Jaguar made in the 1960s and early 1970s with electric oil gauges. It is in perfect original condition, in its original SMITHS box, guaranteed to work properly. This gauge is identical in appearance to the other gauges of an E-type, S-type, Mark 2, MK X, 420 or Daimler 2 1/2.We can provide practically...
Item #: RM00399 -
This is a so-called "Owl-Eye" lighter, so named for its illuminated golden ring that guides the lighter back into its socket in low-light conditions. These were used on British cars of the late 1960s and 1970s, including MGB, MG Midget, Triumph TR6, Spitfire, Jaguar E-type Series II and III, Mini, and many others. This one is in fair condition, with a good socket, knob and amber bezel. The light is complete and clean. The insert is rusty but it might work anyhow. We haven't tested it.We have...
Item #: C7284 -
These are brand new sheetmetal weld-on parking lamp housings for Jaguar XK120, XK140, and XK150 sidelamps or parking lamps. They are nicely made and fit well. We also sell the Lucas L513 lamps to fit these elsewhere on this site. Early XK120 cars used chrome-plated cast housings and L490 sidelamps. We sell L490 sidelamps for these cars, and chrome housings are available by special order. Factory part no. C7284.
Item #: C4198 -
For XK120, all models. 18 gauge steel panel, punched, pressed and drilled with welded reinforcements. Thicker and stronger than original. Support rods available as separate item #X151. Factory part number: C4198
Item #: RM00434 -
We have a limited supply of these UK-published picture books, covering the history of Jaguar and the development of the Mark I and Mark 2, as well as the S-type and Daimler variants. The pictures are really stunning. Text is by Andrea Sparrow and pictures by award-winning photographer David Sparrow. The books are brand new and undamaged.
Item #: 386-175 -
This laminated wooden wrench fits over 52mm Jaguar knock off spinners for tightening and loosening and protects them from hammer marks.We also stock an alternative design: long steel knock off wrenches. For these or 42 mm plywood knock off wrenches to fit MG, Austin-Healey, Triumph, etc.; knock off hammers and knock off spinners, see Related Products below.
Item #: BD4256 -
18 gauge steel, formed, punched and welded. Captive nuts and light bracket. (Factory part: 'Number Plate Bracket' #BD4256 or #BD5645).
Item #: BD9932 -
18 gauge steel, formed, punched and welded. Welded brackets and captive nuts.Factory part: 'Number Plate Bracket' #BD9932Chrome finisher is available by special order for approx. $60 (check for latest price)
Item #: BD3384/85 -
Used on all models into 1953, although they will fit all XK120's. 18 gauge steel. Left and right pair. Jaguar factory part numbers BD3384 & BD3385.Each side is available separately; please contact us to order.