Products 241-252 of 253
Show
Item #: XW2D -
Pair, left and right. 3/8" birch plywood. 8 ply shaped and drilled. Original factory numbers BD6703 & BD4507.The XK120 OTS and FHC analagous part is #XW2; see Related Products below.
Item #: XW2 -
Left and Right pair. 3/8" Birch plywood, 7 ply, shaped and drilled.Original Jaguar factory part numbers: BD4506 & BD4507 The XK120 DHC analagous part is #XW2D; see Related Products below.
Item #: BD6114 -
3/8th inch Baltic Birch plywood (8 ply, 7mm) drilled. Pair. Factory part number BD.6114.The XK120 OTS full front floors are #XW1; see Related Products below.
Item #: RM00567 -
3/8th inch Baltic Birch exterior plywood (8 ply) shaped and drilled. Pair.Jack hole surrounds and covers are also available; see Related Products below. The XK120 FHC and DHC front floors are #XW1C; see Related Products below.
Item #: BD11099/11001 -
These floors fit left-hand drive (LHD) XK140 roadster and drophead coupe models with automatic transmissions. 3/8th inch (7mm) Baltic Birch Plywood (8 ply) floors, pair. Shaped and drilled. (The picture actually shows floors for manual transmission car.) Jaguar part numbers BD11099 and BD11001. For XK140 OTS and DHC automatic cars only. Floors for Manual transmission cars are also available for the same price; see Related Products below.
Item #: BD9411/12 -
These floors fit left-hand drive (LHD) XK140 roadster and drophead coupe models with manual/standard transmissions. 3/8th inch (9mm) Baltic Birch Plywood (8 ply) floors, pair. Shaped and drilled. Jaguar part numbers BD9411 & BD9412. For XK140 OTS and DHC manual/standard cars only. Floors for automatic transmission cars are also available for the same price; see Related Products below.XK140 Fixed Head Coupe uses part # XW5A (automatic transmission) or XW5D (manual transmission); see...
Item #: XW5A/D -
Fits left hand drive (LHD) XK140 FHC (fixed head coupe) with automatic and XK150 all models with automatic gearbox. Made of 3/8th inch (9 mm) Baltic Birch Plywood (8 ply) floors, pair. Shaped and drilled. Floors for XK140 FHC and XK150 cars with manual transmissions and for other XK140 body styles are also available; see Related Products below or contact us. Factory part numbers XK140: BD10602 & BD10603 XK150: BD12902 & BD13034 (in part). ...
Item #: BD9827/28 -
Fits left-hand drive (LHD) XK150 models with manual/standard transmissions. 3/8th inch (9 mm) Baltic Birch Plywood (8 ply) floors, pair. Shaped and drilled. Factory part numbers BD13036 (RHS) and BD15123 (LHS late). Floors for cars with automatic transmissions are also available; see Related Products below.
Item #: XW30 -
Wooden insert screwed to front top metal bow. Milled hardwood (Ash). Pair, left and right. In stock.
Item #: RM00903 -
This is a new wooden instrument panel for late XK120 OTS/Roadster models only, HANDMADE IN THE UK. 5/8 Inch/12-ply exterior birch plywood. Milled and drilled. Side angles glued. To be covered with leather.
Item #: BD9372 -
21 3/8 inches front to back, hinges screw through surface with T-nuts. 3/8" birch plywood, 7 ply, shaped and drilled. This is correct for cars in which the wooden spare wheel cover was NOT covered by an aluminum skin. Original factory part number BD9372 (wood only). If the spare wheel cover is covered by an aluminum skin and the hinges screw through the side, see listing for XW8 in Related Products below.
Item #: BD14129 -
This part is correct for most XK140 and all XK150 cars. 21 inches front to back, hinges screwed to edge. 3/8" birch plywood, 8 ply, shaped and drilled. Original factory part number BD14129 (wood only). This is correct for cars in which the wooden spare wheel cover was covered by an aluminum skin. A few XK140 cars had a cover that wasn't covered by an aluminum skin and measured 21 3/8" front to back, and had hinges that screwed through the top surface; see Related Products for...