Jaguar

This is a rare Ace wheel disc, used to cover the vulgar wire spokes on the wheels of certain quality British cars, including Rolls-Royces, Bentleys, Alvises, Daimlers, Lagondas, Jaguar SS and Mark IV, and others. This one is a little dented but not too bad, and the chrome is even fairly presentable. We do not have any other parts apart from what you see in the pictures. We have tried to show the major defects in the pictures. It is about 19 inches across.

Original spanners for factory Jaguar tool kits are rare and quite valuable. Here is an excellent, correct original Bahco-type 4-inch adjustable spanner for your E-Type or late-model Jaguar saloon. It is marked "JAGUAR," and "BAHCO." This style spanner was used after about 1967.

This is a pair of excellent reproduction air cleaners, correct for Jaguar XK120 OTS and all XK140's, or other car with 1-3/4 inch SU carburetors. The opening is actually 1 5/8" and the bolt spacing is 2 7/8". They are very nicely made, and come with new bolts and correct decals advising that one wash them in petrol every 5000 miles. Quite.

This is a pair of excellent reproduction air cleaners, correct for a Triumph TR3, early TR4, or other car with 1-3/4 inch SU carburetors. The opening is actually 1 5/8" and the bolt spacing is 2 7/8".They are very nicely made, and come with new bolts and correct decals advising that one wash them in petrol every 5000 miles. Quite. Jaguar XK120 and XK140 also used air filters with 1 3/4" openings, which we can also supply.  Please contact us if you need those.

60/1000 Aluminum Dash Panel formed and drilled to fit both Early and Late XK120 Roadsters. Made for left-hand drive models only. (Right-hand drive model part can be special ordered).  Original Jaguar factory number BD4606.

60/1000 Aluminum Dash Panel formed and drilled to Made for left-hand drive models only. (Right-hand drive model part can be special ordered). Original factory number BD8891.

.040 aluminum, bent three sides. Must be trimmed and bent over wood.

The sports car accessory company AMCO made these grille aperture guards for E-type Jaguars in the 1960s and 1970s. This one is 28" wide and comes with original bolts.  We BELIEVE it is correct for a Series 1. This one is in excellent condition, but does have a few small scratches on the underside where it has successfully protected a bonnet from contact with the pavement.

For XK140 Fixed Head Coupe, left-hand-drive. Sold as left and right pair. 18 gauge steel shelf with welded supports & brackets. 22 gauge face with turned edges hemmed. Upper panels. Hardware and special fasteners sold separately (#X71H & #X61F).A single side can be purchased separately for $335. Factory part numbers: BD10062/63 This item is too large to ship by the USPS (unless in 2 boxes) and must ship by Fedex. Shipping calculator is not reliable for this item. Please be aware actual...

For all XK150 left-hand-drive (LHD) models (except right side on XK150-S/3 carburetor models). 18 gauge steel shelf with welded supports & brackets. 22 gauge face with turned edges hemmed. Upper panels. Left and right pair. Hardware and special fasteners sold separately (#X71H & #X61F). Factory part number:  BD12934/35; up to chassis numbers 837422 (DHC) and 835558 (FHC).  Available individually for $295. This item is too large to ship by the USPS (unless in 2 boxes) and must...

For Drop Head Coupe and Roadster. 22 gauge welded assembly with nuts and angle and 16 gauge shelf. Special fasteners (#X64F) sold separately. Original factory part number: BD8571. A partial replacement battery box is also available; see Related Products below.  We can also supply the battery box front insert, doors and fasteners; see Related Products below.

We now offer dzus fasteners as original, although the picture has not been updated yet.One pair is required per door. XK140 DHC and OTS require only one set. XK140 FHC and all XK150 require two sets. (#X74F on the price list is equivalent to 2x #X64F.)Picture shows fasteners with XK150 door. Doors sold separately-#X64 for XK140 and #X74 for XK150.Dzus fasteners may also be available; please contact us.