MG

This is a good reproduction of a kit which was made in the 1960s and 1970s to adjust, tune and synchronize SU carburetors. We have a set of these and use them often. Well, as often as we bother to tune the SU's, that is, which isn't as often as we should.....Includes a jet wrench, instruction booklet and enough special carb tools to balance two or three carburetors.

This is a used taillight plinth for any MGA 1500 or early Twin Cam, coupe or roadster. We have a good selection of secondhand plinths, all in serviceable condition. Please tell us whether you need one side or both, as the two sides have different profiles.  (Selecting both includes a $2 additional shipping charge.) We also sell MGA 1600 plinths and all the lights to go with them; see Related Products below or contact us.

This is a used taillight plinth for any MGA 1600 or late Twin Cam, coupe or roadster. We have a good selection of secondhand plinths, all in serviceable condition. Please tell us which side you need, as the two sides have different profiles.  If you need a pair, see Related Products below. It is not correct for an MGA 1600 Mark II, but we occasionally have that style in stock as well. Please contact us if you need a 1600 Mk II plinth. We also sell MGA 1500 plinths and the lights to go...

This is a pair of used taillight plinths for any MGA 1600 (NOT 1600 MK II) or late Twin Cam, coupe or roadster. We have a good selection of secondhand plinths, all in serviceable condition. They are not correct for an MGA 1600 Mark II, but we occasionally have that style in stock as well, and we stock new and used lamps to fit those. Please contact us if you need a 1600 Mk II plinth. We also sell MGA 1500 plinths and the lights to go with them; see Related Products below. ...

This is a good secondhand Tecalemit 2787 grease gun, correct for MG TD, TF, MGA, early Austin-Healey, and probably other models.It's in good shape and may contain some original English grease.

The Tecalemit 2802 grease gun, also sometimes referred to as an "oil gun," was fitted to some MGA and AC Cobra tool kits, and may have been used on Triumphs and Austin-Healeys of the 1950s and early 1960s. This one is in good condition.

The correct 1-lb. copper hammers are still manufactured by Thor in England. These are the right tool for MGAs, TR3s, Morgans, and big Healeys.We also sell Thor 2-lb hammers, correct for Jaguars, and plywood and steel knock off wrenches to protect your shiny knock off spinners from denting when this fine hammer is applied; see Related Products below.

This is an excellent reproduction of the original MGA Tudor plastic washer bottle, 6 1/2 inches high and 3 inches in diameter. It comes complete with cap and brass fitting.The MGA bracket is also available for $20. The MGB bracket holds the same size bottle (although it's a slightly different shape) and is $11. Please contact us to add one to your order.

Here is one of those charming little English motoring books that were published during the 1950s. It covers modifications and maintenance of prewar and T-series MG sports cars. Author Philip Smith had a passion for these little cars, and was an expert at extracting a few more horsepower from the engine or tweaking the car so it would handle better and provide a more reliable driving experience. This book has had some water damage and the dust jacket is obviously tatty, but overall it's pretty...

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

This is a new drop-forged steel combination-end spanner set including Whitworth sizes 1/8" through 1/2". We use these wrenches regularly in our shop and have found them to be of good quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

We sell brand new Lucas ignition switches as well as lock inserts with keys. These are fine and work well, but the keys are marked LUCAS and are a different shape and keyway from the original Wilmot Breeden Union lock cylinder and keys. We have a very limited supply of brand new old stock units, all with the FS keyway. They were probably made in the 1960s or early 1970s by Wilmot Breeden in England. These cylinders are very rare, especially in new, unused condition, and once they are gone, we...