XK140

This is a pair of decent quality reproduction Lucas spot, or driving, lamps, also known as "Flamethrowers," at 25% off Moss Motors list.They have a clear lens with no fluting or block pattern whatsoever. These are made in Asia, of good quality, although the detailing is not as good as the more expensive reproduction "MADE IN ENGLAND" 576 lamps we carry. The crest at the top of the lamp is correctly marked "LUCAS" but there are no other markings on these lamps. They were sold as options on many...

This is a new reproduction TPS1 directional indicator switch with special screw for an MGA (all years and types), MG TD and TF, early Land Rover, and Jaguar XK140 and early XK150. It is self-cancelling, as were the original Lucas ones. The switch lever can be purchased with the switch (or separately; please inquire for individual purchase). New genuine UK-made switches, made on the original Lucas tooling, and rebuilt original switches are also available; see Related Products below. ...

These are excellent reproduction Lucas-style Windtone horns, as used on a great many British cars of the 1950s and 1960s, including MGA, Triumph TR2, TR3, Austin-Healey Bugeye, 100 and 3000, Jaguar Mark VII, VIII, IX, X, MKI and MK2, XK120, 140, 150, and many others. They are sold as a pair, high and low note, and together they give a commanding sound. They are good quality but do not carry Lucas markings. Contact us if you just want one; we will sell them that way as well.  We have other...

This is an excellent reproduction high-note Lucas-style Windtone horn, as used on a great many British cars of the 1950s and 1960s, including MGA, Triumph TR2, TR3, Austin-Healey Bugeye, 100 and 3000, Jaguar Mark VII, VIII, IX, X, MKI and MK2, XK120, 140, 150, and many others.  They are good quality but do not carry Lucas markings. Some cars came with only a low-note horn; many like to add the high-note horn for a more commanding sound. We also sell a pair of high and low note...

The is a two-fuse fuse block or fuse box with screw terminals.It is correct for a variety of cars, including Jaguar XK140, XK150, later MG TD (from c8142), MG TF, MGA, Bugeye Sprite, Sprite MK I and II, Midget MK 1, TR3, TR3, early TR3A (to TS6000)0, and Austin Healey BN1 - BJ7.It is a nicely made reproduction part. We have a limited stock of NOS ones as well; see related listing below.

For manual cars, all models. 20 gauge steel, welded and punched. Welded flange. Original factory number: BD9283. This part is not always in stock; please check for availability.

This is an original gearbox tunnel for a Jaguar XK140, all models, OTS, DHC or FHC. It is in excellent original rust-free condition. It fits all cars with manual or manual overdrive transmissions. This is an excellent unit, clean and in primer. It just might be NOS, but we cannot verify that. The gearshift collar is NOT included, but is sold separately. We fabricate and sell new reproductions of the tunnel for about the same price as this one, but this part is original and 100...

18 gauge steel, drilled and punched with welded reinforcements and nuts. Pair, left and right.

This is a pair of original Lucas tail lamps. They are correct for MGB and Sprite/Midget from 1961 to 1969. This pair of tail lamps is in excellent used condition. 

These are brand new sheetmetal weld-on parking lamp housings for Jaguar XK120, XK140, and XK150 sidelamps or parking lamps. They are nicely made and fit well. We also sell the Lucas L513 lamps to fit these elsewhere on this site. Early XK120 cars used chrome-plated cast housings and L490 sidelamps. We sell L490 sidelamps for these cars, and chrome housings are available by special order. Factory part no. C7284.

This laminated wooden wrench fits over 52mm Jaguar knock off spinners for tightening and loosening and protects them from hammer marks.We also stock an alternative design: long steel knock off wrenches. For these or 42 mm plywood knock off wrenches to fit MG, Austin-Healey, Triumph, etc.; knock off hammers and knock off spinners, see Related Products below.

Fits all XK120's and all XK140's. Originally used only on the latest XK120's and on XK140's. 18 gauge steel. Left and right pair. Each side is available separately for $65; please contact us to order. Factory part numbers: BD7750 & BD7751