XK140

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

This is a new drop-forged steel combination-end spanner set including Whitworth sizes 1/8" through 1/2". We use these wrenches regularly in our shop and have found them to be of good quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

We sell brand new Lucas ignition switches as well as lock inserts with keys. These are fine and work well, but the keys are marked LUCAS and are a different shape and keyway from the original Wilmot Breeden Union lock cylinder and keys. We have a very limited supply of brand new old stock units, all with the FS keyway. They were probably made in the 1960s or early 1970s by Wilmot Breeden in England. These cylinders are very rare, especially in new, unused condition, and once they are gone, we...

These floors fit left-hand drive (LHD) XK140 roadster and drophead coupe models with automatic transmissions.  3/8th inch (7mm) Baltic Birch Plywood (8 ply) floors, pair. Shaped and drilled. (The picture actually shows floors for manual transmission car.) Jaguar part numbers BD11099 and BD11001. For XK140 OTS and DHC automatic cars only. Floors for Manual transmission cars are also available for the same price; see Related Products below.

These floors fit left-hand drive (LHD) XK140 roadster and drophead coupe models with manual/standard transmissions.  3/8th inch (9mm) Baltic Birch Plywood (8 ply) floors, pair. Shaped and drilled. Jaguar part numbers BD9411 & BD9412. For XK140 OTS and DHC manual/standard cars only. Floors for automatic transmission cars are also available for the same price; see Related Products below.XK140 Fixed Head Coupe uses part # XW5A (automatic transmission) or XW5D (manual transmission); see...

Fits left hand drive (LHD) XK140 FHC (fixed head coupe) with automatic and XK150 all models with automatic gearbox. Made of 3/8th inch (9 mm) Baltic Birch Plywood (8 ply) floors, pair. Shaped and drilled. Floors for XK140 FHC and XK150 cars with manual transmissions and for other XK140 body styles are also available; see Related Products below or contact us. Factory part numbers XK140: BD10602 & BD10603 XK150: BD12902 & BD13034 (in part). ...

Fits left-hand drive (LHD) XK150 models with manual/standard transmissions. 3/8th inch (9 mm) Baltic Birch Plywood (8 ply) floors, pair. Shaped and drilled. Factory part numbers BD13036 (RHS) and BD15123 (LHS late). Floors for cars with automatic transmissions are also available; see Related Products below.

Wooden insert screwed to front top metal bow. Milled hardwood (Ash). Pair, left and right. In stock.

21 3/8 inches front to back, hinges screw through surface with T-nuts. 3/8" birch plywood, 7 ply, shaped and drilled. This is correct for cars in which the wooden spare wheel cover was NOT covered by an aluminum skin. Original factory part number BD9372 (wood only). If the spare wheel cover is covered by an aluminum skin and the hinges screw through the side, see listing for XW8 in Related Products below.

This part is correct for most XK140 and all XK150 cars. 21 inches front to back, hinges screwed to edge. 3/8" birch plywood, 8 ply, shaped and drilled. Original factory part number BD14129 (wood only). This is correct for cars in which the wooden spare wheel cover was covered by an aluminum skin.  A few XK140 cars had a cover that wasn't covered by an aluminum skin and measured 21 3/8" front to back, and had hinges that screwed through the top surface; see Related Products for...