XK140

This is a new center instrument panel for XK140 Drophead and Fixed Head models only, made of 5/8 Inch/12-ply exterior birch plywood. Handmade in the UK. Milled and drilled. Side angles glued. This part is not veneered but veneering is available-please inquire.We also have center instrument panels for XK140 OTS and XK120; see Related Products below. Panels for XK150 are available by special order.

This is a new XK140 OTS/Roadster center instrument panel made of 5/8 Inch/12-ply exterior birch plywood. Milled and drilled. Handmade in the UK.To be covered with leather, not included. Original factory part number BD9228. Center instrument panels for XK140 DHC and FHC and XK120 are also available; see Related Products below.

This is the an Intermotor Sports Coil, replacement for the famous Lucas Sports Coil that delivers a much higher voltage than standard ignition coils and therefore a hotter/more powerful spark than a normal coil for quicker starts and, theoretically, better fuel economy. This is a UK-made part, sold here at a more reasonable price than the major suppliers charge. Lucas no longer manufactures Sports Coils. It comes complete with bracket and fittings for push on or ring terminals. For...

This is a new reproduction jack ratchet handle, replacement for the original King Dick or SJS (Smiths Jacking System) ratchet which came with the cars. It does not carry a brand name, but it's nicely made and works as the original would.Some vehicles this fits: Jaguar XK120 XK140 XK150 Mark I Mark 2Triumph TR2 TR3

This is a brand new reproduction Jaguar three-piece screwdriver, nicely made and correctly marked JAGUAR on the handle. It's the right one for E-type, XKE, Mark 1, Mark 2, Mark VIII and IX, S-type, and XK140 and XK150. These cars originally came with this type screwdriver as part of the toolkit, but most have long been lost. They have not been made for a long time. This is the same screwdriver that is being sold by other suppliers, only cheaper.

This is a rare revolution counter or tachometer for a Jaguar XK120 or XK140, all body styles. It is in good working condition, and has been tested using an electric drill. The pinion has been lightly lubricated and the glass cleaned. This instrument is ready to install, although it is a 70-year-old gauge, so its new owner might want to have it sent out for rebuilding. It's a judgment call. As we said, it has been lubricated and it tests out fine, so maybe it would be good for a while, maybe...

This is very good original jack ratchet handle for a Jaguar XK150, Mark I or Mark 2. It will also work with an XK120 or XK140 jack, as well as Triumph TR2 and TR3 jacks. This one is in decent condition, possibly even unused, with its original gun-blued finish. It has some light rust marks. We stock SJS and BTC jack ratchets for earlier Jaguars and Triumphs, as well as reproductions with no lettering, and we occasionally have an original Jaguar XK jack in stock as well, and normally have XK120,...

This is nice restored jack for a Jaguar Mark I or Mark 2. This one was cleaned, painted and lubricated in our shop and it works and presents as new. We have ratchet handles and all the tools that these classic Jaguars came with in stock. We stock SJS and BTC jack ratchets for earlier Jaguars and Triumphs, as well as reproductions with no lettering, and we occasionally have an original Jaguar XK jack in stock as well, and normally have XK120, 140 and 150 tools and complete tool kits for sale....

This is a brand new, nicely-made reproduction bonnet mascot, correct for Jaguar saloons made between about 1950 and 1968, including Mark I, II (2), 3.4S, 3.8S, Mark VII, VIII, and IX. These large (a little under 8 inches long) leapers were often fitted to XK120, XK140 and XK150 cars when they were new, usually by the dealer. This one is very nicely made, with good detailing and flawless chrome.

This is the small (4 1/2 inches) leaping cat mascot, a brand new modern reproduction part. These leapers were commonly fitted to XJ Jaguars as well as others (possible Mark X?). It is not the right size for a Mark 2. It comes in its original velveteen drawstring bag, just like a bottle of Chivas Regal.

This is a New Old Stock (NOS) British Prefocus (BPF) or P36 base yellow bulb (12V, 45W), made in England decades ago.They are foglamp bulbs, which have horizontal filaments, but they will work fine in a spot or driving lamp as well.  They are correct for Lucas 576, 700, or Ranger lamps.We have only a very few of these bulbs left, and when they're gone, we cannot be sure of getting any more.

This is a very rare new old stock Lockheed brake bleeder tube and tin for Jaguar XK120, XK140, Mark I, Mark VII and Mark VIII, MG TD, MG TF, MGA 1500 and MG Magnette toolkits. It is the rare early cream tin, not reproduced and extremely hard to find in this condition.We have a handful of these tins, but once they are gone, we may never find another in this condition.