Series I / II / III

This is a so-called "Owl-Eye" lighter, so named for its illuminated golden ring that guides the lighter back into its socket in low-light conditions. These were used on British cars of the late 1960s and 1970s, including MGB, MG Midget, Triumph TR6, Spitfire, Jaguar E-type Series II and III, Mini, and many others. This one is in fair condition, with a good socket, knob and amber bezel. The light is complete and clean. The insert is rusty but it might work anyhow. We haven't tested it.We have...

Red, four-place, Brexton picnic tea set. This is a basic set with two nice china cups and four saucers, all matching and marked "BREXTON." The thermos flasks match and are in good condition.

This is an upgraded, fully electronic brand new 12 volt Lucas RF95 regulator, as used on MG TC, Jaguar XK120, Alvis and other quality cars of the 1940s and 1950s. The original Lucas RF95 control box operated with bobbins and contact points, and could be troublesome when it got out of adjustment or the points got dirty or corroded.  This regulator was made in England. They come without a proper Lucas-marked cover, due to trademark laws, but we fit the ones we sell with an...

SMITHS ammeters in classic British cars were usually rated at 30 amps, fine for the original generator, but in case you have upgraded to an alternator, you'll need one that can handle the extra amperage.This one is made by Caerbont, the successor to the SMITHS company, on original factory tooling in the same shop that the old company occupied. It comes complete with mounting bracket and light.NOT FOR USE WITH ALTERNATORS OF GREATER THAN 60 AMPS!

This is brand new, correct oil and water gauge for an Austin-Healey Sprite or MG Midget from about 1958 to 1979. The lettering style on the face is correct for 1968 and later cars, although this gauge is otherwise very similar to the earlier style, and it will work in any Sprite or Midget, regardless of year. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British gauge size. It is manufactured by Caerbont, the company which took...

This brand new oil pressure and water temperature gauge, made by SMITHS in England, is the correct one for MGBs with the metal dash, MG Midgets and Austin-Healey Sprites, some Austin-Healey 3000s, Morgans, and Land Rovers. It looks identical to the MGA gauge, except that it is marked "SMITHS" instead of "JAEGER," and will work fine in just about any car, British or otherwise. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British...

This is an original Tecalemit grease gun, similar to the gun fitted to AC Ace, Aceca and Cobra, Triumph TR4 and TR6. It is in good condition and would be a worthy addition to the tool kit of any British car of the 1950s or 1960s.

This lovely little tyre gauge will fit your vintage Jaguar or Rover tool box or roll perfectly. It is a generic, unlabelled gauge, marked only MADE IN ENGLAND but it's the right size and shape for a Jag or Rover kit. It's also a lot less money than the correct gauge.This one is pretty much identical to a Dunlop 6J apart from the Dunlop logo. It's 4 1/2 inches long.We do sell Jaguar tyre gauges, both Dunlop 6 and 6J and the style with JAGUAR and the wings logo, in case you want one of those....

Here is a very good used Trico windscreen washer bottle, correct for Jaguar XK150, Mark VIII, I and IX, MG Magnette, and other quality cars of the mid-to-late 1950s. It is in nice shape, clean and undamaged. The top has been repainted (not by us).The pictures show a representative example but not an exact match.  We will send pictures of what we have in stock on request. We also have new Trico lids and a variety of original Trico bottles, pumps and brackets; please inquire. We have other...

This is a new forged steel 3/8" 12-point drive socket set, made by AB Tools. Included are Whitworth sizes 1/8" through 1/2". We purchase these from a company in England but we are quite sure they are made in Asia. Whitworth fasteners were used for some applications on virtually all English cars and motorcycles through the 1970's.

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

This is a new drop-forged steel combination-end spanner set including Whitworth sizes 1/8" through 1/2". We use these wrenches regularly in our shop and have found them to be of good quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.