Mark VII / VIII / IX

This is n original horn button assembly for any year Jaguar XK140 or 150, Mark I, VIII and Mark IX (maybe VIIM as well?). It has some patina of age but is in overall decent condition. It has been cleaned and tested.

These kits are now in stock. This is a good reproduction of a kit which was made in the 1960s and 1970s to adjust, tune and synchronize SU carburetors. We have a set of these and use them often. Well, as often as we bother to tune the SU's, that is, which isn't as often as we should..... Includes a jet wrench, instruction booklet and enough special carb tools to balance two or three carburetors.

This is a very nice used grease gun, correct for Jaguar XK150, XKE, E-type, Mark 2, Mark IX and X, S-type, Daimler 2 1/2 and other Jaguars of the 1960s and late 1950s. It is in very good original condition.

All Jaguars of the 1950s, 1960s, and 1970 with wire wheels came with a Thor 2-lb. copper and rawhide hammer for the wire wheel knockoffs. This is the correct one for an XK120, XK140, XK150, Mark I, Mark II, E-type, XKE, Mark VIII, Mark IX, Mark X, 240, 340, S-type 2.4 and 3.8, and most Daimlers.It's in new, perfect condition, 100 percent concours correct and made by the original manufacturer in England, exactly as original.We also have copper 1-lb hammers and plywood and steel knock off...

This lovely little tyre gauge will fit your vintage Jaguar or Rover tool box or roll perfectly. It is a generic, unlabelled gauge, marked only MADE IN ENGLAND but it's the right size and shape for a Jag or Rover kit. It's also a lot less money than the correct gauge.This one is pretty much identical to a Dunlop 6J apart from the Dunlop logo. It's 4 1/2 inches long.We do sell Jaguar tyre gauges, both Dunlop 6 and 6J and the style with JAGUAR and the wings logo, in case you want one of those....

Jaguars made in the 1950s, 1960s and 1970s(XK120, XK140, XK150, Mark 2, 340, E-Type, XKE) came with high quality tool kits. There were several types of 4-inch adjustable spanners fitted to Jaguar kits from about 1955 through the 1970s, all marked "JAGUAR." These are very rare and expensive. This is a nice new 4-inch adjustable spanner, not correct for any Jaguar factory kit, but it fits perfectly and would make a fine substitute for somebody not concerned with building a concours-quality kit....

These are really well made reproductions of the correct 1950s Garringtons spanners, as used in Jaguar XK120, XK140, Mark VII, VIII and possibly other Jaguars. They are made to the original specifications, nicely done and show quality. They will fit the toolbox of a Mark I or 2, Mark IX or X, or S-type, although the correct spanner for those cars is a little different. We do carry a later style toolkit spanner for late model E-Types on this website.

This is an excellent reproduction large Trico windscreen washer top, 5" or 125 mm in diameter, correct for Jaguar XK150, Mark IX, Mark I, MG Magnette ZA and ZB, Humbers of the 1950s, Rovers, Rileys and many other British quality cars of the mid-to-late 1950s. This is a very nicely made product, manufactured in very small quantities. You will have to install your original vacuum reservoir or purchase one separately; please contact us if you need one. We also sell small Trico lids and new...

This is an excellent reproduction Trico windscreen washer top, correct for Jaguar XK120, 140, Mark VII, and many other British quality cars of the mid-to-late 1950s. This is a very nicely made product, manufactured in very small quantities in England. It is approximately 3 1/2 inches or 90 mm in diameter.You will have to install your original vacuum reservoir or purchase one separately; please contact us if you need one.We also sell new large Trico lids and complete Trico washer bottle...

Here is an excellent reproduction of the Trico vacuum-operated windscreen washer bottle and bracket assembly, as used on Jaguar XK150 and Mark IX, MG Magnette, Rovers, and other quality British cars of the 1950s. This is a quality reproduction, correct in every detail and show quality.We have a small assortment of original Trico washer bottles, and occasionally a new old stock (NOS) unit; please inquire.We also stock new Trico lids for this unit as well as Trico washer bottle assemblies for...

Here is a very good used Trico windscreen washer bottle, correct for Jaguar XK150, Mark VIII, I and IX, MG Magnette, and other quality cars of the mid-to-late 1950s. It is in nice shape, clean and undamaged. The top has been repainted (not by us).The pictures show a representative example but not an exact match.  We will send pictures of what we have in stock on request. We also have new Trico lids and a variety of original Trico bottles, pumps and brackets; please inquire. We have other...

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.