All Jaguar Models

This is an excellent original revolution counter from a 1958 Jaguar Mark IX saloon. It is in good working condition, clean with nice face, bezel and casing. The needle works when the input shaft is turned and it is free and smooth, so we are betting it could be used as it is.This instrument is designed for external illumination. However, it could be fitted with internal bulbs in the bosses at the rear with slight modification, and then it would be applicable for a Jaguar XK 120, 140 or early...

SMITHS ammeters in classic British cars were usually rated at 30 amps, fine for the original generator, but in case you have upgraded to an alternator, you'll need one that can handle the extra amperage.This one is made by Caerbont, the successor to the SMITHS company, on original factory tooling in the same shop that the old company occupied. It comes complete with mounting bracket and light.NOT FOR USE WITH ALTERNATORS OF GREATER THAN 60 AMPS!

This is a very nice used grease gun, correct for Jaguar XK150, XKE, E-type, Mark 2, Mark IX and X, S-type, Daimler 2 1/2 and other Jaguars of the 1960s and late 1950s. It is in very good original condition.

All Jaguars of the 1950s, 1960s, and 1970 with wire wheels came with a Thor 2-lb. copper and rawhide hammer for the wire wheel knockoffs. This is the correct one for an XK120, XK140, XK150, Mark I, Mark II, E-type, XKE, Mark VIII, Mark IX, Mark X, 240, 340, S-type 2.4 and 3.8, and most Daimlers.It's in new, perfect condition, 100 percent concours correct and made by the original manufacturer in England, exactly as original.We also have copper 1-lb hammers and plywood and steel knock off...

This lovely little tyre gauge will fit your vintage Jaguar or Rover tool box or roll perfectly. It is a generic, unlabelled gauge, marked only MADE IN ENGLAND but it's the right size and shape for a Jag or Rover kit. It's also a lot less money than the correct gauge.This one is pretty much identical to a Dunlop 6J apart from the Dunlop logo. It's 4 1/2 inches long.We do sell Jaguar tyre gauges, both Dunlop 6 and 6J and the style with JAGUAR and the wings logo, in case you want one of those....

Jaguars made in the 1950s, 1960s and 1970s(XK120, XK140, XK150, Mark 2, 340, E-Type, XKE) came with high quality tool kits. There were several types of 4-inch adjustable spanners fitted to Jaguar kits from about 1955 through the 1970s, all marked "JAGUAR." These are very rare and expensive. This is a nice new 4-inch adjustable spanner, not correct for any Jaguar factory kit, but it fits perfectly and would make a fine substitute for somebody not concerned with building a concours-quality kit....

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

This is a new drop-forged steel combination-end spanner set including Whitworth sizes 1/8" through 1/2". We use these wrenches regularly in our shop and have found them to be of good quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

We sell brand new Lucas ignition switches as well as lock inserts with keys. These are fine and work well, but the keys are marked LUCAS and are a different shape and keyway from the original Wilmot Breeden Union lock cylinder and keys. We have a very limited supply of brand new old stock units, all with the FS keyway. They were probably made in the 1960s or early 1970s by Wilmot Breeden in England. These cylinders are very rare, especially in new, unused condition, and once they are gone, we...