Products 37-48 of 48
Show
Item #: NOS PL700 -
These lovely headlamps were used on many British cars during the 1960s and 1970s. They were popular aftermarket accessories and were used on many rally cars, as they give far more light output than a normal sealed beam lamp. These are modern reproductions with the famous PL700 shield, although the shield no longer says LUCAS. This is a stunning new old stock pair of PL700 lamps. They are in superb original condition, in tatty original boxes. They come with new old stock bulbs in their...
Item #: SFT576 -
These beautiful lights are the famous 5.76-inch Lucas SFT576 foglamps, sometimes known as "Pathfinders." They are the lamps that won the Monte Carlo rally when used on Minis, provided elegant illumination on Rolls-Royce Silver Clouds and Jaguar XK 140 and 150, Mark I, Mark VIIM, VIII and IX, and dressed up the front of Austin-Healeys, Triumph TR2-3-4-5-250, MGA, MGB, Magnette, MG TD and TF, and so many other British cars. They were sold as options on many of these cars, and thousands were sold...
Item #: 162-800 -
This is a pair of decent quality Tourist Trophy reproduction 5 3/4" (5.76") Lucas foglamps, also known as "Pathfinders," at over 25% off Moss Motors list.They have a clear fluted lens to throw a broad, flat beam. These are made in Asia, of good quality, although the detailing is not as good as the more expensive reproduction "MADE IN ENGLAND" 576 lamps we carry; see Related Products below. The crest at the top of the lamp is correctly marked "LUCAS" but there are no other markings on these...
Item #: BD13057/8 -
Fits all XK150's. 18 gauge steel with welded channels for weatherstrip. Left and right pair. Weatherstrip and oval washers are available separately.Each side is available separately; please contact us to order.Factory part numbers: BD13057 & BD13058
Item #: RM00627 -
This is an excellent original revolution counter from a 1958 Jaguar Mark IX saloon. It is in good working condition, clean with nice face, bezel and casing. The needle works when the input shaft is turned and it is free and smooth, so we are betting it could be used as it is.This instrument is designed for external illumination. However, it could be fitted with internal bulbs in the bosses at the rear with slight modification, and then it would be applicable for a Jaguar XK 120, 140 or early...
Item #: 115-416 -
SMITHS ammeters in classic British cars were usually rated at 30 amps, fine for the original generator, but in case you have upgraded to an alternator, you'll need one that can handle the extra amperage.This one is made by Caerbont, the successor to the SMITHS company, on original factory tooling in the same shop that the old company occupied. It comes complete with mounting bracket and light.NOT FOR USE WITH ALTERNATORS OF GREATER THAN 60 AMPS!
Item #: 3020 -
This is a very nice used grease gun, correct for Jaguar XK150, XKE, E-type, Mark 2, Mark IX and X, S-type, Daimler 2 1/2 and other Jaguars of the 1960s and late 1950s. It is in very good original condition.
Item #: C992 -
All Jaguars of the 1950s, 1960s, and 1970 with wire wheels came with a Thor 2-lb. copper and rawhide hammer for the wire wheel knockoffs. This is the correct one for an XK120, XK140, XK150, Mark I, Mark II, E-type, XKE, Mark VIII, Mark IX, Mark X, 240, 340, S-type 2.4 and 3.8, and most Daimlers.It's in new, perfect condition, 100 percent concours correct and made by the original manufacturer in England, exactly as original.We also have copper 1-lb hammers and plywood and steel knock off...
Item #: Jaguar 4" spanner -
Jaguars made in the 1950s, 1960s and 1970s(XK120, XK140, XK150, Mark 2, 340, E-Type, XKE) came with high quality tool kits. There were several types of 4-inch adjustable spanners fitted to Jaguar kits from about 1955 through the 1970s, all marked "JAGUAR." These are very rare and expensive. This is a nice new 4-inch adjustable spanner, not correct for any Jaguar factory kit, but it fits perfectly and would make a fine substitute for somebody not concerned with building a concours-quality kit....
Item #: 381-608 -
This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.
Item #: RM00501 -
This is a new drop-forged steel combination-end spanner set including Whitworth sizes 1/8" through 1/2". We use these wrenches regularly in our shop and have found them to be of good quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.
Item #: RM00615 -
We sell brand new Lucas ignition switches as well as lock inserts with keys. These are fine and work well, but the keys are marked LUCAS and are a different shape and keyway from the original Wilmot Breeden Union lock cylinder and keys. We have a very limited supply of brand new old stock units, all with the FS keyway. They were probably made in the 1960s or early 1970s by Wilmot Breeden in England. These cylinders are very rare, especially in new, unused condition, and once they are gone, we...