All Austin-Healey Models

Excellent original Simmons Headfast zinc (often thought of as "lead," these hammers were always zinc alloy) knockoff hammer, as used on Maserati 3500GT, Sebring and Mistral, Jaguar E-type Series II and III, Lotus Elan (Elite?) MGB and other high quality sports and GT cars. This is an excellent, barely-used example, still retaining its original --and quite rare-- sticker on the handle. There are some marks on the handle from the time it spent in the boot of an E-type or Maser.These hammers have...

SMITHS ammeters in classic British cars were usually rated at 30 amps, fine for the original generator, but in case you have upgraded to an alternator, you'll need one that can handle the extra amperage.This one is made by Caerbont, the successor to the SMITHS company, on original factory tooling in the same shop that the old company occupied. It comes complete with mounting bracket and light.NOT FOR USE WITH ALTERNATORS OF GREATER THAN 60 AMPS!

This is brand new, correct oil and water gauge for an Austin-Healey Sprite or MG Midget from about 1958 to 1979. The lettering style on the face is correct for 1968 and later cars, although this gauge is otherwise very similar to the earlier style, and it will work in any Sprite or Midget, regardless of year. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British gauge size. It is manufactured by Caerbont, the company which took...

This brand new oil pressure and water temperature gauge, made by SMITHS in England, is the correct one for MGBs with the metal dash, MG Midgets and Austin-Healey Sprites, some Austin-Healey 3000s, Morgans, and Land Rovers. It looks identical to the MGA gauge, except that it is marked "SMITHS" instead of "JAEGER," and will work fine in just about any car, British or otherwise. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British...

This brand new voltmeter, made by SMITHS in England (now doing business as CAERBONT Ltd.), is the perfect thing for monitoring the condition of your battery in any British car, although it will work fine in just about any car, British or otherwise, and matches the gauges used in most English cars of the 1960s and 1970s. It is guaranteed to work perfectly. It comes complete with bracket, installation instructions, and light socket.It is also available with a black bezel for $15 more. Specify...

This is a new Lucas-type SRB316 starter solenoid, but not supplied by Lucas or in a Lucas box.  It is the correct starter solenoid for most six-cylinder Jaguars, including XK120, XK140, XK150, E-type, Mark I, Mark 2, Mark VII, Mark VIII, Mark IX, Mark IX, S-type, 420, 240, 340, Daimler 2 1/2, 250, SP250, as well as early MGB, Triumph TR2, TR3, TR4, big Healey, Land Rover, and many others.Genuine Lucas SRB316 solenoids are also available; see Related Products below. ...

These kits are now in stock. This is a good reproduction of a kit which was made in the 1960s and 1970s to adjust, tune and synchronize SU carburetors. We have a set of these and use them often. Well, as often as we bother to tune the SU's, that is, which isn't as often as we should..... Includes a jet wrench, instruction booklet and enough special carb tools to balance two or three carburetors.

This is a good secondhand Tecalemit 2787 grease gun, correct for MG TD, TF, MGA, early Austin-Healey, and probably other models.It's in good shape and may contain some original English grease.

This is an original Tecalemit grease gun, similar to the gun fitted to AC Ace, Aceca and Cobra, Triumph TR4 and TR6. It is in good condition and would be a worthy addition to the tool kit of any British car of the 1950s or 1960s.

The Tecalemit 2802 grease gun, also sometimes referred to as an "oil gun," was fitted to some MGA and AC Cobra tool kits, and may have been used on Triumphs and Austin-Healeys of the 1950s and early 1960s. This one is in good condition.

The correct 1-lb. copper hammers are still manufactured by Thor in England. These are the right tool for MGAs, TR3s, Morgans, and big Healeys.We also sell Thor 2-lb hammers, correct for Jaguars, and plywood and steel knock off wrenches to protect your shiny knock off spinners from denting when this fine hammer is applied; see Related Products below.

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.