XK120

New Braided Fuel Pipe to connect the solid fuel line from the tank to the carburetors. The item has the correct BSF fittings to connect to your Jaguar.It's a good idea to replace this part if yours is over ten years old or of unknown age, as they can leak when they get older and the electric fuel pump will happily continue to spray gasoline all over the engine compartment from such a leak until you turn off the ignition (or if the car burns up and melts the battery).We can supply practically...

This sale is for a fuel tank drain plug and in-tank filter with new fiber gasket, for most classic (pre-1970) Jaguars, including XK120, 140, 150, XKE, E-type, XKE, Mark MK 2, I, II, VII, VIII IX X, 3.4S, 3.8S, and others. Jaguar Part Number is C.990. This is a beautifully-made new part, all brass body as original with brass screen and steel drain plug. The new fiber sealing washer is not pictured but is included.

This is a good quality jack hole cover for a Jaguar XK120 OTS, XK140 and XK150 all models, and large sedans (Mark V, VII, VIII, IX). It covers the hole in the floor for the jack.We also sell the metal surrounds for this part as well as the floors for all XK Jaguar models.Jaguar P/N: BD3037 or BD9534Quantity of fit: 2

This is a pair of jack hole surround plates for XK120 Roadster (only) that screw to the wooden floors. They are made of 18 ga. steel with all holes.Jack hole covers are and jack hole surrounds for XK140 and XK150 are also available in separate listings.Jaguar P/N: BD3461

Original gear knob for Jaguars with all-synchro gearbox. Reverse is to the left and back. This knob shows signs of wear but there are no cracks in the plastic. These are quite rare, and reproductions (which aren't authentic, with the wrong font) are currently unavailable.

This is a fine accessory for any Jaguar owner. It is a semi-copy of the rare and very valuable original key fob usually fitted to Jaguars of the 1950s and 1960s with a black leather "torpedo" design. The key fob is of original English Morocco leather while the cloisonne enameled Jaguar badge is a new reproduction of the original, which was made by CUD. Originals were stamped with the CUD name on the reverse, but this reproduction does not have a maker's name. The quality of the cloisonne is...

This is a perfect reproduction of the original fiberboard item fitted to most Jaguars with XK engines of the 1950s and 1960s.Jaguar P/N C34080 or C24126

Here is a brand new accelerator pedal assembly, correct for a Jaguar XK120 OTS, DHC or FHC. It is very similar to the pedal used on Jaguar XK140s as well. This is a reproduction part but beautifully made. These are sold by the major Jaguar parts dealers in the US for $330, with a lead time of several months. This one is in stock with us. It was made in England by a major maker of new reproduction parts for vintage Jaguars. ...

Original C. 2412 very rare bell housing from an early Jaguar XK120. This is in good shape with clutch release fork and shaft.

BACK IN STOCK! This wonderful book is currently out of print, but we have found a few copies in England, so we are offering them here for sale until they run out. Quite simply, the Jaguar XK Explored series, authored and lavishly illustrated by the great Jaguar enthusiast, Bernard Viart, is the most useful printed resource available for the XK Jaguar restorer, bar none. No arguments.  This thick second-edition volume, comprising 407 full-color pages and featuring 2600...

Early XK120 Jaguars were equipped with a fuel gauge that doubled as an engine oil level gauge when a button on the instrument panel was pressed. The switch has been unavailable for many years, but we have a limited supply of reconditioned secondhand switches. The original Jaguar part number is C.2759 and the Lucas number is 31229 or 31229/A. This switch is also correct for  certain other quality British cars of the 1940s and 1950s, such as Rovers and Alvises. There are minor variations in...

This is a pair of sidescreen bracket frames for a Jaguar XK120 so-called Long Top roadster, also known as Open Two Seater, or OTS. They were replated to show quality many years ago and stored since. We do not have the other parts to the sidescreens at this time.