Midget

Excellent original Simmons Headfast zinc (often thought of as "lead," these hammers were always zinc alloy) knockoff hammer, as used on Maserati 3500GT, Sebring and Mistral, Jaguar E-type Series II and III, Lotus Elan (Elite?) MGB and other high quality sports and GT cars. This is an excellent, barely-used example, still retaining its original --and quite rare-- sticker on the handle. There are some marks on the handle from the time it spent in the boot of an E-type or Maser.These hammers have...

SMITHS ammeters in classic British cars were usually rated at 30 amps, fine for the original generator, but in case you have upgraded to an alternator, you'll need one that can handle the extra amperage.This one is made by Caerbont, the successor to the SMITHS company, on original factory tooling in the same shop that the old company occupied. It comes complete with mounting bracket and light.NOT FOR USE WITH ALTERNATORS OF GREATER THAN 60 AMPS!

This is brand new, correct oil and water gauge for an Austin-Healey Sprite or MG Midget from about 1958 to 1979. The lettering style on the face is correct for 1968 and later cars, although this gauge is otherwise very similar to the earlier style, and it will work in any Sprite or Midget, regardless of year. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British gauge size. It is manufactured by Caerbont, the company which took...

This brand new oil pressure and water temperature gauge, made by SMITHS in England, is the correct one for MGBs with the metal dash, MG Midgets and Austin-Healey Sprites, some Austin-Healey 3000s, Morgans, and Land Rovers. It looks identical to the MGA gauge, except that it is marked "SMITHS" instead of "JAEGER," and will work fine in just about any car, British or otherwise. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British...

This good original speedometer is the right instrument for an MG Midget or Austin-Healey Sprite made from 1968 to 1979. It is the correct style for cars with the US-type padded dashboard.This speedometer is in good cosmetic condition, with only light rust on the casing. The face, glass and needle, which moves freely, are all in good condition.It has not been tested.The number on the face reads, 5226/06

This tachometer came from an MGB or an MG Midget. It's the small size, used from 1968 through 1976 in US-market MGBs and 1968 through 1979 in MG Midgets and Austin-Healey Sprites.It is in good cosmetic condition and the needle moves freely, but it has not been tested. If it doesn't work, return it for a full refund.

This is a very nicely-made horn push center motif for MGB, correct for 1962 to 1967 cars. It is new and in the original packaging. We sometimes have a used original one in stock as well.  Please contact us if interested.

This is a good reproduction of a kit which was made in the 1960s and 1970s to adjust, tune and synchronize SU carburetors. We have a set of these and use them often. Well, as often as we bother to tune the SU's, that is, which isn't as often as we should.....Includes a jet wrench, instruction booklet and enough special carb tools to balance two or three carburetors.

The correct 1-lb. copper hammers are still manufactured by Thor in England. These are the right tool for MGAs, TR3s, Morgans, and big Healeys.We also sell Thor 2-lb hammers, correct for Jaguars, and plywood and steel knock off wrenches to protect your shiny knock off spinners from denting when this fine hammer is applied; see Related Products below.

This is an excellent reproduction of the original MGA Tudor plastic washer bottle, 6 1/2 inches high and 3 inches in diameter. It comes complete with cap and brass fitting.The MGA bracket is also available for $20. The MGB bracket holds the same size bottle (although it's a slightly different shape) and is $11. Please contact us to add one to your order.

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

This is a new drop-forged steel combination-end spanner set including Whitworth sizes 1/8" through 1/2". We use these wrenches regularly in our shop and have found them to be of good quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.