Midget

This tachometer came from an MGB or an MG Midget. It's the small size, used from 1968 through 1976 in US-market MGBs and 1968 through 1979 in MG Midgets and Austin-Healey Sprites.It is in good cosmetic condition and the needle moves freely, but it has not been tested. If it doesn't work, return it for a full refund.

This is a very nicely-made horn push center motif for MGB, correct for 1962 to 1967 cars. It is new and in the original packaging. We sometimes have a used original one in stock as well.  Please contact us if interested.

These kits are now in stock. This is a good reproduction of a kit which was made in the 1960s and 1970s to adjust, tune and synchronize SU carburetors. We have a set of these and use them often. Well, as often as we bother to tune the SU's, that is, which isn't as often as we should..... Includes a jet wrench, instruction booklet and enough special carb tools to balance two or three carburetors.

This is an original Tecalemit grease gun, similar to the gun fitted to AC Ace, Aceca and Cobra, Triumph TR4 and TR6. It is in good condition and would be a worthy addition to the tool kit of any British car of the 1950s or 1960s.

The correct 1-lb. copper hammers are still manufactured by Thor in England. These are the right tool for MGAs, TR3s, Morgans, and big Healeys.We also sell Thor 2-lb hammers, correct for Jaguars, and plywood and steel knock off wrenches to protect your shiny knock off spinners from denting when this fine hammer is applied; see Related Products below.

This is an excellent reproduction of the original MGA Tudor plastic washer bottle, 6 1/2 inches high and 3 inches in diameter. It comes complete with cap and brass fitting.The MGA bracket is also available for $20. The MGB bracket holds the same size bottle (although it's a slightly different shape) and is $11. Please contact us to add one to your order.

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

This is a new drop-forged steel combination-end spanner set including Whitworth sizes 1/8" through 1/2". We use these wrenches regularly in our shop and have found them to be of good quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

We sell brand new Lucas ignition switches as well as lock inserts with keys. These are fine and work well, but the keys are marked LUCAS and are a different shape and keyway from the original Wilmot Breeden Union lock cylinder and keys. We have a very limited supply of brand new old stock units, all with the FS keyway. They were probably made in the 1960s or early 1970s by Wilmot Breeden in England. These cylinders are very rare, especially in new, unused condition, and once they are gone, we...