100-4 / 100-6 / 3000

This brand new oil pressure and water temperature gauge, made by SMITHS in England, is the correct one for MGBs with the metal dash, MG Midgets and Austin-Healey Sprites, some Austin-Healey 3000s, Morgans, and Land Rovers. It looks identical to the MGA gauge, except that it is marked "SMITHS" instead of "JAEGER," and will work fine in just about any car, British or otherwise. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British...

This is a new SRB316 starter solenoid, but no longer supplied by Lucas or in a Lucas box.  It is the correct starter solenoid for most six-cylinder Jaguars, including XK120, XK140, XK150, E-type, Mark I, Mark 2, Mark VII, Mark VIII, Mark IX, Mark IX, S-type, 420, 240, 340, Daimler 2 1/2, 250, SP250, as well as early MGB, Triumph TR2, TR3, TR4, big Healey, Land Rover, and many others.

This is a good reproduction of a kit which was made in the 1960s and 1970s to adjust, tune and synchronize SU carburetors. We have a set of these and use them often. Well, as often as we bother to tune the SU's, that is, which isn't as often as we should.....Includes a jet wrench, instruction booklet and enough special carb tools to balance two or three carburetors.

This is a good secondhand Tecalemit 2787 grease gun, correct for MG TD, TF, MGA, early Austin-Healey, and probably other models.It's in good shape and may contain some original English grease.

The Tecalemit 2802 grease gun, also sometimes referred to as an "oil gun," was fitted to some MGA and AC Cobra tool kits, and may have been used on Triumphs and Austin-Healeys of the 1950s and early 1960s. This one is in good condition.

The correct 1-lb. copper hammers are still manufactured by Thor in England. These are the right tool for MGAs, TR3s, Morgans, and big Healeys.We also sell Thor 2-lb hammers, correct for Jaguars, and plywood and steel knock off wrenches to protect your shiny knock off spinners from denting when this fine hammer is applied; see Related Products below.

This is a new forged steel 3/8" 12-point drive socket set, made by the venerable King Dick Tool Company in England. Included are Whitworth sizes 1/8" through 1/2". We use these sockets regularly in our shop and have found them to be of excellent quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

This is a new drop-forged steel combination-end spanner set including Whitworth sizes 1/8" through 1/2". We use these wrenches regularly in our shop and have found them to be of good quality.Whitworth fasteners were used on virtually all English cars and motorcycles through the 1970's.

We sell brand new Lucas ignition switches as well as lock inserts with keys. These are fine and work well, but the keys are marked LUCAS and are a different shape and keyway from the original Wilmot Breeden Union lock cylinder and keys. We have a very limited supply of brand new old stock units, all with the FS keyway. They were probably made in the 1960s or early 1970s by Wilmot Breeden in England. These cylinders are very rare, especially in new, unused condition, and once they are gone, we...

These beautiful lamps are the famous 5.76-inch Lucas SFT576 fog lamps, sometimes known as "Pathfinders." They are the lamps that won the Monte Carlo rally when used on Minis, provided elegant illumination on Rolls-Royce Silver Clouds and Jaguar XK 140 and 150, Mark I, Mark VIIM, VIII and IX, and dressed up the front of Austin-Healeys, Triumph TR2-3-4-5-250, MGA, MGB, Magnette, MG TD and TF, and so many other British cars. They were sold as options on many of these cars, and thousands were sold...