MGA

This laminated wooden wrench fits over standard British 42mm knock off spinners for tightening and loosening and protects them from hammer marks.We also stock an alternative design: long steel knock off wrenches. For these or 52 mm Jaguar plywood knock off wrenches, knock off hammers and knock off spinners, see Related Products below.

Excellent original Simmons Headfast zinc (often thought of as "lead," these hammers were always zinc alloy) knockoff hammer, as used on Maserati 3500GT, Sebring and Mistral, Jaguar E-type Series II and III, Lotus Elan (Elite?) MGB and other high quality sports and GT cars. This is an excellent, barely-used example, still retaining its original --and quite rare-- sticker on the handle. There are some marks on the handle from the time it spent in the boot of an E-type or Maser.These hammers have...

SMITHS ammeters in classic British cars were usually rated at 30 amps, fine for the original generator, but in case you have upgraded to an alternator, you'll need one that can handle the extra amperage.This one is made by Caerbont, the successor to the SMITHS company, on original factory tooling in the same shop that the old company occupied. It comes complete with mounting bracket and light.NOT FOR USE WITH ALTERNATORS OF GREATER THAN 60 AMPS!

This is brand new, correct oil and water gauge for an Austin-Healey Sprite or MG Midget from about 1958 to 1979. The lettering style on the face is correct for 1968 and later cars, although this gauge is otherwise very similar to the earlier style, and it will work in any Sprite or Midget, regardless of year. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British gauge size. It is manufactured by Caerbont, the company which took...

This brand new oil pressure and water temperature gauge, made by SMITHS in England, is the correct one for MGBs with the metal dash, MG Midgets and Austin-Healey Sprites, some Austin-Healey 3000s, Morgans, and Land Rovers. It looks identical to the MGA gauge, except that it is marked "SMITHS" instead of "JAEGER," and will work fine in just about any car, British or otherwise. It comes complete with bracket and grommet for the firewall. This gauge is the standard 2-inch (52 mm) small British...

This adapter will allow you to dispense with the original type, messy and unpleasant cartridge-type oil filter on your Sprite, Midget (EXCEPT 1500), Mini, Morris Minor, Austin or other BMC car with an A-series engine. This does NOT fit a Mark IV Midget with a 1500 engine.It takes a standard filter, available at any auto parts store.We also sell filter adapters for MGA, MGB and other cars with a B-series engine; please contact us.

This a nicely made brand new reproduction MGA steering wheel, price well below the competition's price. It is the same one everybody else sells. We also carry the center cap with MG logo and clips to attach it. Please select under "options" if you want a center cap and clips.

This is a good reproduction of a kit which was made in the 1960s and 1970s to adjust, tune and synchronize SU carburetors. We have a set of these and use them often. Well, as often as we bother to tune the SU's, that is, which isn't as often as we should.....Includes a jet wrench, instruction booklet and enough special carb tools to balance two or three carburetors.

This is a used taillight plinth for any MGA 1500 or early Twin Cam, coupe or roadster. We have a good selection of secondhand plinths, all in serviceable condition. Please tell us whether you need one side or both, as the two sides have different profiles.  (Selecting both includes a $2 additional shipping charge.) We also sell MGA 1600 plinths and all the lights to go with them; see Related Products below or contact us.

This is a used taillight plinth for any MGA 1600 or late Twin Cam, coupe or roadster. We have a good selection of secondhand plinths, all in serviceable condition. Please tell us which side you need, as the two sides have different profiles.  If you need a pair, see Related Products below. It is not correct for an MGA 1600 Mark II, but we occasionally have that style in stock as well. Please contact us if you need a 1600 Mk II plinth. We also sell MGA 1500 plinths and the lights to go...

This is a pair of used taillight plinths for any MGA 1600 (NOT 1600 MK II) or late Twin Cam, coupe or roadster. We have a good selection of secondhand plinths, all in serviceable condition. They are not correct for an MGA 1600 Mark II, but we occasionally have that style in stock as well, and we stock new and used lamps to fit those. Please contact us if you need a 1600 Mk II plinth. We also sell MGA 1500 plinths and the lights to go with them; see Related Products below. ...

This is a good secondhand Tecalemit 2787 grease gun, correct for MG TD, TF, MGA, early Austin-Healey, and probably other models.It's in good shape and may contain some original English grease.