Products 49-60 of 73
Show
Item #: BD9907/8 & BD10042/3 -
Complete welded assemblies of 18 gauge shut face with welded pillar assembly edge and studs with pressed recess for latch. This a left and right matched pair. Each side is available separately; please contact us to order.Factory part numbers:Shut pillar: BD9907 & BD9908 Shut face: BD10042 & BD10043
Item #: RM00940 -
Complete welded assemblies of 18 gauge pillar, 16 gauge face with welded studs. Pressed recess for latch. For XK140 OTS Roadster. This a left and right matched pair. Each side is available separately for $175. Please contact us if you need only one side. Factory number BD8762 & BD8763
Complete welded assembly of 18 gauge shut face with welded pillar assembly edge and studs with pressed recess for latch. This a left and right matched set. We will need measurements of the channel dimensions, as there are at least 3 configurations.
Item #: BD12726/27 -
Complete welded assembly of 18 gauge shut face with welded pillar assembly edge and studs with pressed recess for latch. This a left and right matched set.Each side is available separately; please contact us to order.Factory part numbers:Shut pillars: BD12726 & BD12727Shut faces: BD14558 & BD14559
Item #: BD5746/47 -
Pair left and right. 18 gauge steel with welded nuts, brackets, gussets and 16 gauge reinforcements.Factory Part Number BD5746/47 in part.
Item #: X1A -
Pair left and right side. 18 gauge steel. Welded nuts, gussets and 16 gauge brackets.
Item #: X1B -
Pair left and right sides. 18 gauge steel with welded brackets and gussets and 16 gauge reinforcements. Each side is available separately for $275 each. Please contact us if you need only one side.
Item #: BD9907 & BD9908 -
Pair left and right sides. 18 gauge steel with welded brackets and gussets and 16 gauge reinforcements.
Item #: BD14096/97 -
Pair left and right sides. 18 gauge steel with welded brackets and gussets and 16 gauge reinforcements. 14/16 gauge front bracket.Jaguar part numbers BD14096/97.
18 gauge tray with 3 welded reinforcements. Made in USA. Part of Factory number BD9336 'Container for Spare Wheel'
Item #: RM00947 -
18 gauge pressed and punched with welded reinforcements. Part of factory number BD9336 'Container for Spare Wheel'
Item #: BD4172 & BD7778 -
For XK120, all models. 18 gauge pressed steel with welded reinforcements and rear special lip included and welded. Early style: BD4172 (X34) is 9" tall at the front (adjacent to fuel tank)Later style: BD7778 (X34C) is 10" tall at the front All DHC and later FHC (changeover sometime in 1953) take the later style. Some OTS cars may also take the later style. Please measure the height of this part on your car before ordering.