Products 1-12 of 16
Show
.040 aluminum, bent three sides. Must be trimmed and bent over wood.
Item #: BD3037 -
This is a good quality jack hole cover for a Jaguar XK120 OTS, XK140 and XK150 all models, and large sedans (Mark V, VII, VIII, IX). It covers the hole in the floor for the jack.We also sell the metal surrounds for this part as well as the floors for all XK Jaguar models.Jaguar P/N: BD3037 or BD9534Quantity of fit: 2
Item #: BD3461 -
This is a pair of jack hole surround plates for XK120 Roadster (only) that screw to the wooden floors. They are made of 18 ga. steel with all holes.Jack hole covers are and jack hole surrounds for XK140 and XK150 are also available in separate listings.Jaguar P/N: BD3461
Item #: BD9415 -
This is a pair of jack hole surround plates for Jaguar XK140 and XK150 that screw to the wooden floors. They are made of 18 ga. steel with all holes.Jack hole covers are and jack hole surrounds for XK120 are also available in separate listings.Jaguar P/N: BD9415
Item #: BD6079/80 -
Pair of Metal Floors, made of of 18 gauge steel with punched jack holes, welded flanges and many welded nuts. Jack hole covers, wood inserts and hardware available separately. Factory part numbers: BD6079 & BD6080.
Item #: BD9563 -
18 gauge steel, drilled and punched with welded reinforcements and nuts. Pair, left and right.
Item #: BD4507 & BD6703 -
This is a left and right pair of 3/8" birch plywood floors for XK120 DHC, 8 ply, shaped and drilled. Original factory numbers BD6703 & BD4507. The XK120 OTS and FHC floors are #XW2; see Related Products below. We also supply other wood and metal floors for all XK120s: see Related Products below.
Item #: BD4506/07 -
This is a Left and Right pair of 3/8" Birch plywood, 7 ply, wooden boot floors for XK120 OTS or FHC, shaped and drilled. Original Jaguar factory part numbers: BD4506 & BD4507 XK120 DHC boot floors are #XW2D; see Related Products below. Other XK120 wood and metal floors are also available; see Related Products below.
Item #: BD6114 -
This is a pair of 3/8th inch Baltic Birch plywood (8 ply, 7mm) front floor inserts for XK120 FHC and DHC. Factory part number BD.6114. The XK120 OTS full front floors are #XW1; see Related Products below.Metal front floors and boot floors are available; see Related Products below.
Item #: BD4266/67 -
This is a pair of 3/8th inch Baltic Birch exterior plywood (8 ply) front floors, shaped and drilled, for LHD XK120 roadster.Jaguar part no. BD4266 & BD4267. Jack hole surrounds and covers are also available; see Related Products below. The XK120 FHC and DHC front floors are #XW1C; see Related Products below.
Item #: BD11099/11001 -
This is a right-and-left pair of trunk or boot floors for a left hand drive (LHD) XK140 OTS or DHC with automatic transmission. They are made of 3/8th inch (9mm) Baltic Birch Plywood (8 ply), shaped and drilled. (The picture actually shows floors for manual transmission car.) Jaguar part numbers BD11099 and BD11001. For LHD XK140 OTS and DHC automatic cars only. Floors for Manual transmission cars and for FHC cars are also available for the same price; see Related Products...
Item #: BD9411/12 -
This is a right-and-left pair of trunk or boot floors for all (LHD & RHD) XK140 OTS or DHC with manual/standard transmission. They are made of 3/8th inch (9mm) Baltic Birch Plywood (8 ply), shaped and drilled. Jaguar part numbers BD9411 & BD9412. Floors for cars with automatic transmission and FHC cars are also available; see Related Products below. ...