Products 61-72 of 72
Item #: RM00949 -
For XK120, all models. 18 gauge pressed steel with welded reinforcements and rear special lip included and welded.Early style is 9" tall at the front (adjacent to fuel tank); later style is 10" tall. All DHC and later FHC (changeover sometime in 1953) take the later style. Some OTS cars may also take the later style. Please measure the height of this part on your car before ordering.
Item #: RM00585 -
This is a plastic housing for the steering column of an MGB. It will work with any MGB from about 1968 to 1980, although it is the correct style for 1971 through 1976. It is in good condition overall, a little grubby but it would clean up fine. No cracks or other major damage are apparent.
Item #: RM00582 -
This used transmission tunnel from a Triumph TR6 is in good shape, apart from some minor damage to the bottom flange, as the photos show. This could be dealt with using large washers or a strip of steel to bridge the damaged area.We believe this tunnel will fit earlier Triumph TRs which came with fiberboard tunnels. The TR6 heavy-duty plastic tunnel should be an improvement.It's not heavy but it is a large item so shipping charges may include an oversize surcharge from the USPS or other...
Item #: RM00928 -
18/20 gauge steel formed and welded. Pair left and right.
Item #: RM00927 -
18/20 gauge formed and welded, 16 gauge bracket, with birch ply insert. Pair left and right.
Item #: RM00878 -
Shield panel above battery box. For all XK150 models except XK150-S right side, and left side on brake servo tank models. 20-gauge steel with welded nuts and edge for seal. Left and right pair.Left side: Jaguar part no. BD.13317 for LHD chassis nos. 830001 - 831898 and RHD chassis nos. 820001 - 820016.Right side: Jaguar part no. BD.13318 for LHD cars with air cleaner in wing valance.Panels available separately for $55 each; please contact us.XK150 LHS panel with hole for brake servo is X73FL,...
Item #: RM00584 -
This Mark 2 Jaguar upper steering column cover has been cleaned and repainted. It is in excellent condition. We also have an NOS lower housing, but please email us for details.
Item #: RM00609 -
A PAIR of small slotted, angled brackets, attaching plinth to bumper, or front valance or battery box extension to chassis. Fits all models.
Item #: RM00961 -
This is a pair of vent boxes for XK120, XK140 and very early (1957) XK150 with flat screen. 22 gauge welded box assembly. Pair left and right.Original factory numbers BD5183/84.
Item #: RM00960 -
This fits all later cars with curved screen. 22 gauge welded box assembly. Identical pair. For XK120, XK140 and very early XK150 (1957 only), we can supply the earlier style vent boxes, X56A, for $165. Please contact us to order.
Item #: RM00958 -
These fit XK120, XK140 and very early XK150 with flat screen. Welded hinge assembly. Identical pair.Original factory numbers BD5127 & BD5128.If you need the later style vent door, please contact us.
Item #: RM00957 -
Pair of vent hinge assemblies for later XK150 cars with curved screen. 20 gauge assembly welded to hinge.